|
Post by justwannano on Nov 13, 2010 15:06:37 GMT -6
|
|
|
Post by trapperray on Nov 13, 2010 17:21:35 GMT -6
From what I saw, there's a heck of alot of welding? Ray
|
|
|
Post by justwannano on Nov 13, 2010 17:38:15 GMT -6
From what I saw, there's a heck of alot of welding? Ray Not necessarily. The pivot for the dog can be bolted on. The pivot for the trigger can be bolted on. The rear cover can be screwed on. What else ?
|
|
Ghost
Shy Talker
Posts: 28
|
Post by Ghost on Nov 13, 2010 17:46:38 GMT -6
I really appreciate this link Just! I was one of the guys interested in this information and had been searching that site for it since I posted the question about it here, without any luck. For you to come back and post this "just" because you knew there were some folks out here who were interested in the information speaks volumes about you. Nice follow through sir.
|
|
|
Post by TexA on Nov 13, 2010 18:49:32 GMT -6
I guess I just made it TOO SIMPLE when this "DP THING" all started a couple years ago..........
Seems like all/a lot of the "New Inventors" DP TRAPS sure are A LOT JUST LIKE what I posted back then............ HUMMMMMMM
I know one thing FOR SURE, MINE Work!!!!!!!!!!
|
|
|
Post by justwannano on Nov 13, 2010 18:54:31 GMT -6
I guess I just made it TOO SIMPLE when this "DP THING" all started a couple years ago.......... Seems like all/a lot of the "New Inventors" DP TRAPS sure are A LOT JUST LIKE what I posted back then............ HUMMMMMMM I know one thing FOR SURE, MINE Work!!!!!!!!!! They sure do. I've got 1. Nice trap. Have a good 1 just
|
|
|
Post by trapperray on Nov 13, 2010 19:29:58 GMT -6
Just it was nice of you to make the post,I agree, but I do see 4 welds that have to be made for the trap to be functional..Ray
|
|
|
Post by justwannano on Nov 13, 2010 21:10:07 GMT -6
Just it was nice of you to make the post,I agree, but I do see 4 welds that have to be made for the trap to be functional..Ray My first several DP traps were made without welds. I know they will and do work just fine without welding. If you just tell me which ones you see that need welds I will be glad to explain how to make them without welding Have a good 1 just
|
|
bowboy78
Hyper-Active Trap Talker
"Watch were your goin, Remember were ya been, Thats the way I see it im a simple man"Charlie Daniels
Posts: 116
|
Post by bowboy78 on Nov 15, 2010 10:20:44 GMT -6
i think i get the idea...now that my truck is fixed i got some time to try and build a couple PS Whoah probably got be careful when rotating the trap around with the drill running...if its goin to fast thatll rip your ears off... just sayin take caution... i dont know if it might almost me easier to clamp the trap in the vise and use a hand drill than using the drill press...just my opinion...
|
|
|
Post by justwannano on Nov 15, 2010 14:01:20 GMT -6
i think i get the idea...now that my truck is fixed i got some time to try and build a couple PS Whoah probably got be careful when rotating the trap around with the drill running...if its goin to fast thatll rip your ears off... just sayin take caution... i dont know if it might almost me easier to clamp the trap in the vise and use a hand drill than using the drill press...just my opinion... You really really need a drill vice. They are cheap at harbor Freight and are enough to hold most small projects. Have a good 1 just
|
|
bowboy78
Hyper-Active Trap Talker
"Watch were your goin, Remember were ya been, Thats the way I see it im a simple man"Charlie Daniels
Posts: 116
|
Post by bowboy78 on Nov 15, 2010 15:17:30 GMT -6
i think i get the idea...now that my truck is fixed i got some time to try and build a couple PS Whoah probably got be careful when rotating the trap around with the drill running...if its goin to fast thatll rip your ears off... just sayin take caution... i dont know if it might almost me easier to clamp the trap in the vise and use a hand drill than using the drill press...just my opinion... You really really need a drill vice. They are cheap at harbor Freight and are enough to hold most small projects. Have a good 1 just weve got vises...industrial ones... dads a toolmaker so we have all that cool stuff
|
|
|
Post by justwannano on Nov 15, 2010 16:00:19 GMT -6
Wish I had all that cool stuff. A mill would be the best tool to use til you made yourself a jig.
have a good 1 just
|
|